|
| Nozzles |
 |
Fanjet Fishtail Nozzles |
|
| Nozzles are used for sheet knock off showers, wire return felt showers, felt wetting showers, cylinder mould, felt lubricating showers and thickeners. Nozzle tips are available with OD threads for use on moulds and back showers for thickeners where there is a space constraint.; |
 |
| |
Fitting on pipe |
|
 |
 |
 |
 |
Material: SS 304, 316 |
| The spray effect is produced by two slots machined on opposite sides of a disc at right angles to each other. The hole at the centre of disc forms knife edge orifice which prevents gradual build up of small fibre particles and thereby discourages the tendency to eventual nozzle blockage. These nozzle tips can also be used for self cleaning showers with brush arrangement |
Water Consumption at different pressures (kg/cm2)
|
| Jet Nozzles
Size Dia |
2 |
4 |
5 |
6 |
7 |
| 1.0 |
0.7 |
0.9 |
1.0 |
1.1 |
1.2 |
| 1.5 |
1.6 |
2.3 |
2.6 |
2.8 |
3.1 |
| 2.0 |
3.3. |
4.6 |
5.2 |
5.8 |
6.0 |
| 2.5 |
4.1 |
5.8 |
6.5 |
7.1 |
7.6 |
| 3.0 |
5.7 |
8.1 |
9.0 |
9.8 |
10.7 |
| 3.5 |
7.4 |
10.4 |
11.6 |
12.7 |
13.8 |
|
Nozzles available in 30, 45, 60 degrees
|
| |
|
|
